Pneumatic delivery system Has Many Benefits

Industry persuaded by performance on each occasion. If the product should be handling a very specific process that needs to be thin as possible, you need to go to the drawing board and really think of a solution that gets the job done. If you’ve never heard of pneumatic conveying, or you are not sure of its strength, it is definitely the right guide for you. It is fully understood to be skeptical, especially if you are trying to restructure the manufacturing process in one way or another. Pneumatic conveying system on the market designed to provide a sterile setup for how to handle powders and solids without introducing dust into the system. For something as delicate as electronics, it may be a decisive victory for any company.

Trying to choose a system that will let you make the most of this very important process. Did you know that when it comes to pneumatic conveying there are actually three different systems in play? System have a negative pressure, positive pressure systems, and hybrid systems that use a little of both systems to make the process of entirely.

The different negative pressure system to get the most attractive at first because the pressure used is designed in such a way that energy is transferred mainly to move the product. There is also a rotary valve is involved which will make the gas to flow freely. The advantage of this system is that it can be used when you are dealing with materials that are very toxic, because contamination can cause problems. Dust handling system also excels in a negative-pressure, but you’ll still get the benefits of positive pressure systems.

However, there are some weaknesses in the system of negative pressure, especially the fact that you can not use it with a high level of solids. For that, you really need to go to a positive pressure system. This is where it would be more suitable for processing high levels of solids quickly without the risk of contamination is coming from the picture. Do not forget that you also want to look at the problem of scalability. While both the size of the system, you can calculate the cost in the “future” of your project. In other words, you probably already know all the costs for installation and implementation, but if you think about the types of systems that would ultimately when the project needs to be extended a few years from Now? It is important to keep these things in mind for the future, after all.

It ‘s important to find a supplier that you trust. It is not just enough to look in powder handling and pneumatic conveying. You want to look into the reputation of the company you are interested in. Do they treat you with respect from the beginning? Do they answer your questions and demonstrate expertise from start to finish? Take your time while looking at a different system. You should look for the costs of installation and implementation, which may vary depending on the system eventually to go. Check things for yourself now, while it’s still in your mind. Good luck!

Both comments and pings are currently closed.

Comments are closed.